Female Header Connector 2.54mm Single Row Dip TYPE 1*2PIN To 1*40PIN H=8.50mm

Female Header Connector 2.54mm Single Row Dip TYPE 1*2PIN To 1*40PIN H=8.50mm

What's the Female Header

Female Header was made of housing contain with metal contacts. The female contacts are designed to hold or retain the male contacts. When both male and female parts of the connector come together will connecting the board to board.

Normally the female header have single row/dual row/three row or four row, widely used in electronics, electrical appliances, instruments in the general connection of the main components of the current or signal transmission. Usually with the male header to supporting the use of a board to board connection. The utility model is matched with an electronic wiring harness terminal to form a board to wire connection.

SYFHA108-XXXXA01.pdf

PCB Connector orientations
The term PCB Connector refers to a basic multipin connection system, typically in a rectangular layout. A mating pair of PCB Connectors will either be for board-to-board or cable-to-board (wire-to-board). The board-to-board layouts can give a range of PCB connection orientations, all based on 90 degrees increments: Parallel or mezzanine – both connectors are vertical orientation;90 Degree, Right Angle, Motherboard to Daughterboard – one connector is vertical, one horizontal;180 Degree, Coplanar, Edge-to-Edge – both connectors are horizontal orientation.

FAQ

1. where is your factory?

We are located in Shenzhen,Guangdong.

2. How about your quality control?

All the products will be 100% checked before the shipment.

3. Do you provide a sample?

Of course,free sample with freight collect.

4. What is the lead time?

It depend on quality, generally within 7-15 days after pay for the order.

5. What is the MOQ?

In general 100pcs, but small order can be accepted.

6. Quality problems?

If there is any quality problem or question, we could offer technical support or return service.